Location

Date

Duration

Language

Discipline

Introduction

This five day course covers principles and applications of various types of bearings, including plain journal, ball, and roller bearings. It explains installation, inspection and repair of bearings, deals with specialized bearings. Covers bearing failure modes, lubrication, Failure analysis and services practices.

Objective

Name the two main categories of bearings and cite their advantages.

Identify bearings by the kind of support they provide.

Describe the three kinds of stresses acting on shafts.

Explain the function of lubricating

• Name and explain the characteristics that are most important in materials for bearings

• Explain bearing repair procedures.

• Identify the functions of the various parts of a typical rolling-element bearing.

• Describe the common methods of mounting bearings

• State typical applications for oil lubrication of bearings.

• Detail the cleaning procedures for different oil lubrication systems

• Give five easy rules for lubricating bearings.

• Identify a principal cause of early bearing failure.

• Describe installation procedures for antifriction and plain journal bearings.

• Name the different types of bearing failure and their causes.

• Tell how bearings should be cleaned and lubricated after inspection

Audience

• Technicians and Supervisors

• New Engineers

• Supervisors and Technicians in Refurbishment Facilities

• Bearing Procurement Specification Writers and Supervisors

Content

Day 1

BEARING TECHNOLOGY

Introduction to bearing technology 

Bearing description

Terminology

Bearing application

Type of bearings

Frictional Bearings

Types of Plain Bearings

Journal Bearings 

Tilting pad bearing

Axial thrust bearing

Combination Radianl / Thrust Bearings

Vibration due to bearing

Bearing materials

Plain Bearing Lubrication

Troubleshooting - Plain Bearing Failure

Wiping

Wiing on a White - metal

Scoring 

Erosion

Fatigue

Fretting

Misalignment

Corrosion and Deposits 

Lubricant Oxidation

Anti frication Bearings

Classification and Characteristics of Rolling Bearings

Terminology of Bearing Parts

Characteristics

Bearing Life

Sound

Part numbering

Bearing accessories

Bearing selection

Day 2

BEST PRACTICE FITTING AND REMOVAL

Shaft and Housing Design

Housings

Misalignment

Replacement Considerations

Mounting Accessories

Shaft and Housing Fits

Bearing Fit Criteria

Checking Fit Integrity

Bearing Internal Clearances

Typical Fit Examples

Fixing of Bearings

Tolerances

Mounting Preparation

Cold, temperature and hydraulic mounting

Types of shaft mounting

Mechanical Mounting

Temperature Mounting

Mounting with Sleeves Hydraulically

• How to fit and remove common bearing types

• Using workshop and specialist fitting tools

• Effects of Loose Fit: Rotating Shaft and Inner Ring

• Bearing Arrangements

• Dismounting Procedures

• Removal Techniques

Day 3

BEARING DIAGNOSTICS

Bearing Failure Analysis

Overview

Bearing Life

Misalignment

Failure Mode Classification

False Brinelling Caused by Static

Vibration

Conducting the Analysis

Securing evidence

Bearing damage and corrective measures

Flaking

Seizure

Cracking and notching

Cage damage

Meandering wear patterns

Smearing and scuffing

Rust and corrosion

Fretting

Wear

Electrolytic corrosion

Dents and scratches

Creep

Surface matting

Peeling

Fatigue

Misalignment

Lubrication Failure

Day 4

APPLICATION OF BEARINGS

Critical considerations when selecting and applying bearings into machinery

Bearing housing/bearing isolators

Cantilevers or overhung impeller pumps

In-between bearing or fully supported shaft pumps

Vertical pumps

Bearing housing protection devices

Felt and lip seals

Labyrinths

Magnetic seals

Power turbine bearings

Shaft and Housing Repair

• Maintaining Bearings

• Dismount anti-friction bearings using a bearing press and/or a bearing puller

• Inspect the bearing for signs of failure

• Clean the shaft and check for taper and out-of-round using the proper measuring instruments

• Clean the housing and check for damage

• Select the proper bearing for replacement, if necessary

• Properly orient a bearing prior to installation

• Mount a bearing using an induction heater and/or an arbor press

• Measure the bearing's inner and outer clearances during installation

• Properly lubricate bearings per manufacturers' recommendations

Day 5

TRIBOLOGY AND LUBRICATION Oil

Oil Lubrication Method

Selection of lubricating oil

Oil quantity

Lubricating oil analysis

            Oil analysis tests

            Viscosity

            Contamination

            Fuel dilution

            Solids content

            Fuel soot

            Nitration

            Total acid number (tan)

           Total base number (tbn)

           Particle count

           Spectrographic analysis

          Wear particle analysis

          Ferrography

Setting up an effective program

Lubricant audit process

Baseline signature

Equipment evaluation

Routes

Frequency of monitoring

Tests

Post-overhaul testing

Contractor overhaul templates

Data analysis

Root-cause analysis

Grease

Grease Lubrication

Types of grease

Grease filling and replacement

Overfilling and underfilling

Certificate

MAESTRO CONSULTANTS Certificate of Completion for delegates who attend and complete the training course

Methodology

Our courses are highly interactive, typically taking a case study approach that we have found to be an effective method of fostering discussions and transferring knowledge. Participants will learn by active participation during the program through the use of individual exercises, questionnaires, team exercises, training videos, and discussions of       “real life”       issues in their organizations. The material has been designed to enable delegates to apply all of the material with immediate effect back in the workplace.

Fees

$5,250